4 Level damage to Hardisk

In layman may be difficult to fix, but it is technically hard drive is damaged can be repaired, depending on the level of damage. . Little story about the hard drive. I divide the disk into 4 levels, is based on research and experience during handling of hard drive damage. .

Ø  Level 1 Damage that occurred at this level is usually caused by Bad sectors. To handle this there are several ways and variations of the experiment, adjusted to the hard drive brand and the number of bad sectors.

·  To start handler can use the command FORMAT C: / C (adjust the drive you will be formatted). / C is used for cluster mebersihkan who damaged.

·       The second step, if not managed can use the Disk Manager program from each hard drive manufacturer.

·   If not successful you can also use the software HDDREG, please download on the internet program.

·    If not successful try the Low Level Format or Zero File.

·    If you still can not, you can do the cutting sector who damaged hard drive, by dividing it and not use the damaged sectors.

Ø  Level 2 Damage at level 2 is the partition hard drive and data loss. This could be caused by a virus or error using utility programs. Some need to be considered in restoring the lost hard drive partition, the hard drive capacity and type of file system. Partition with FAT File System is more easily restored than NTFS or Linux File System.

·      Check the first hard disk partition by using FDISK or Disk Manager

·      To restore it can use software such as Acronis Disk Director, Handy Recovery, Stellar Phoniex etc..

Ø  Level 3 Damage erosive hard drive detected in BIOS but can not be used, always appears an error message when the computer do the POST. Usually this is caused by the firmware of the hard drive who problematic. For many of these symptoms occur in Maxtor brand hard drives with a series of names of Gods. To fix it you can download the firmware program from the hard drive brand website.

Ø  Level 4 Damage caused hard drive not properly detected by the BIOS and can not be used again. This is the hardest level in my opinion. Due to repairs we need a little permutations electronic devices and components inside. Menganggulangi hard drive not detected by the BIOS many ways.

·      Check the electrical current running to the hard drive

·      Changing the IC on the mainboard Hard Drive

·      Open the Cover Cover your hard disk and hard drive checks the position of Head

·      How extreme yg yg damaged hard disk drive can be cannibalized by others who keruskan who are different, can be a way to replace maiboardnya or take her IC.

Hopefully this could be an additional reference for you who want to try repairing the hard drive. Good luck